Showing posts with label Free support and advise for vinyl cutter. Show all posts
Showing posts with label Free support and advise for vinyl cutter. Show all posts

Sunday, May 2, 2010

How to install and use the macros?

How to install and use the macros?

Macros for CorelDRAW are usually distributed as separate GMS files. In order to install these macros, just copy (unzip) the files listed on this page in Draw\GMS folder in your current installation. If this folder doesn't exists, create it first. For example, if you installed CorelDRAW in "C:\Program Files\Corel\Graphics10", then you need to copy the GMS file(s) into "C:\Program Files\Corel\Graphics10\Draw\GMS". Restart CorelDRAW and it should pick up the new module automatically.

In order to run a macro, just go to Tools>Visual Basic>Play... menu then pick up the GMS module in "Macros in" list and select the macro to play.

for more help :-mail to comcaresystem@rediffmail.com

Wednesday, April 14, 2010

convert image to a vector graphic format using Adobe Illustrator’s “Live Trace” function

Do you have a bitmap (pixel based) image you would like to convert to vector? Translation: Do you have a picture you want to cut out in vinyl? It’s easy to convert black and white images (and even some other images) to a vector graphic format using Adobe Illustrator’s “Live Trace” function. Follow these steps carefully, their order is important.


Pro Tip: For images not so fabulously suited for this purpose, don’t be afraid to use Photoshop to put it into grey scale. Also, use a Blur for smoother edges on images that you’ve enlarged. Pixelation is difficult for tracing.

1. Open a new Illustrator Document.

2. Paste our friend here into the middle of the document. You can leave his size alone.

3. While he is selected (You should see a blue box around him) go to the “Object” Menu.

Select “Ungroup”. Then, from the “Object” menu again, select “Clipping Mask” (near the bottom) and hit Release.

4. Deselect the object by clicking on white space outside the blue box.

5. You’re now ready to trace. Select the “Object” Menu once again, and go to “Live Trace” and then “Make”.

Pro Tip: If for some reason, make is not available, you’ve not followed the previous 5 steps correctly.

6. Most of the time, You’re done. Save in your favorite Vinyl friendly format, and get to cutting. However, sometimes, the trace looks like an impressionist painting of it’s former self. If this is the case, read on:

7. From the “Object” Menu, select “Live Trace” and go to “Tracing Options”

8. In the top left hand corner of the menu there is a drop down box labeled “Preset”. There is a TON of different options in here like “Line Drawing”, “Comic Art”, “Ink Drawing”, etc. Try them all. Just because it says “Comic Art” doesn’t mean it won’t work awesome for your picture. One of these presets will solve 99% of all tracing problems.

9. If it doesn’t work on ANY of the presets, find the one that works the closest. In the window there are lots of numbers and options. …. Start playing. :-)

Monday, April 12, 2010

Foison vinyl cutter c24 communication settings

If you cannot get your cutter working, check that you've followed these steps carefully.

1) Turn your cutter off, and plug it into a free USB port on your computer. The new hardware wizard should appear, or if you've already done this, it should go "Bing Bong"

2) On the cutter, Keep hitting "Menu" until you see the setting for "Baud." The value should read 09600/38400. If it does not, use the arrow keys to make that so. Then, hit mode until you see normal screen FOISON.

3) Make a note of the Com port and set the flow control. To do this: Go to Start, and then Run. In the box enter:

devmgmt.msc

or right click "my computer"--properties--device manager---ports.Then, hit OK.

4) Hit the plus sign next to "Ports COM And LPT"

5) You should see "USB Serial Adapter", Right click on this and go to "Properties"

6) From there, select "Port Settings".Adjust the Boud Rate as per cutter setting. Set the flow control to "X-ON/X-OFF"

7) Hit "Advanced", Make a note of the Com Port, and if possible change it to something 1-4 if they're not in use.

8. Hit apply and OK to leave those menus. Close device manager.

9) Open Flexi, use the "T" on the left hand side to type a couple of letters.

10) Go to File, then hit "Cut/Plot"

11) This opens the Cut Plot screen. In the top left you should see CM-24 @ com x or CX-24 @ com x. The x needs to match up with the com port we noted earlier. If it does not:

12)Hit the properties button under theCM-24 @ com x drop down box. Select the right hand most tab. It has a picture of something that looks like a microphone.

13) At the top, change the com port to match yours. Hit OK

14) At the bottom, make sure "Flow Control" says "X-ON/X-OFF"

15) Hit "Send" on the cut plot screen. Your cutter should come to life.

For more information mail to : comcaresystem@rediffmail.com



Friday, April 2, 2010

Roland GX-24 and print and cut function

Roland GX-24 and print and cut function


1. Develop your design in Corel or PhotoShop
2. Save it as a jpeg or bitmap.
3. Open Cut Studio and go to File and select the Print / Cut function. This will drop your registration marks.
4. Click on the import icon on the toolbar and select your graphic.
5. Click on the graphic and size the graphic to the desire size.
6. Then print the graphic.
7. Click on the graphic and go to Image Outline function under the Object heading.
8. Slide the Alignment Image Density ruler across to the right so that it removes most of the contour lines. Click on the extract contour lines and close that window.
9. Select the icon on the left that shows all the contour nodes. Delete out all the nodes in the inside that you don't want to be cut out.
10. Align the printed transfer on the GX-24. Select the "Sheet" function and the proper downforce pressure.
11. Click the Cut button and let the cutter do its magic.
12. Weed the excess polymer and transfer.

Saturday, March 27, 2010

vinyl cutter basic information

Basic Information about Cutting Plotter

Monday, January 5th, 2009
A cutting plotter ( or sometimes it is also called vinyl cutter) is similar to a regular wide-format printer, except that it uses a cutting blade instead of a writing stylus or printer head. Instead of adding ink to paper, it cuts shapes out of raw materials, often vinyl. Cutting plottersare used to create packaging prototypes, signmaking  and to cut out letters. Cutting plotters can be set up as a single function devices, or as multifunction tools that can both print and cut. If you are interested in buying a plotter cutter for your business, there are a few things you need to know.
Basic features of a plotter cutter
If you are looking for a basic plotter cutter then there are three main features that you will want to examine.
·                            First, look at the size of the machine. Since size is going to impact the cost of the machine, you don’t want to buy a cutting plotter that is oversized for the projects that your company does. On the other hand, you also don’t want to buy a plotter cutter that is too small to handle the projects you have on deck.  Redsail will provide different models with different sizes.
·                            Next you will want to look at the cutting force of the machine. Most machines will have a range of cutting forces that you can select from such as a cutting force range of 30 to 500 gf (gram force), so ask the dealer what cutting  force is required for your application.
·                            The final feature to look at is the cutting resolution. The cutting resolution will determine the fineness of the lines and grooves that you will be able to make. Cutting resolution is usually measured in millimeters per step.

vinyl cutter basic information

Basic Information about Cutting Plotter

Monday, January 5th, 2009
A cutting plotter ( or sometimes it is also called vinyl cutter) is similar to a regular wide-format printer, except that it uses a cutting blade instead of a writing stylus or printer head. Instead of adding ink to paper, it cuts shapes out of raw materials, often vinyl. Cutting plottersare used to create packaging prototypes, signmaking  and to cut out letters. Cutting plotters can be set up as a single function devices, or as multifunction tools that can both print and cut. If you are interested in buying a plotter cutter for your business, there are a few things you need to know.
Basic features of a plotter cutter
If you are looking for a basic plotter cutter then there are three main features that you will want to examine.
·                            First, look at the size of the machine. Since size is going to impact the cost of the machine, you don’t want to buy a cutting plotter that is oversized for the projects that your company does. On the other hand, you also don’t want to buy a plotter cutter that is too small to handle the projects you have on deck.  Redsail will provide different models with different sizes.
·                            Next you will want to look at the cutting force of the machine. Most machines will have a range of cutting forces that you can select from such as a cutting force range of 30 to 500 gf (gram force), so ask the dealer what cutting  force is required for your application.
·                            The final feature to look at is the cutting resolution. The cutting resolution will determine the fineness of the lines and grooves that you will be able to make. Cutting resolution is usually measured in millimeters per step.

Friday, March 26, 2010

Show all blogs

installation process for Redsail vinyl cutter

(1) Place the machine: 
Put the machine on a horizontal table, change plotter four foots, to keep plotter very horizontally. Make enough space not only to the front of plotters but also to the back of plotter.
No shake when plotter is running. Don’t touch the  vinyl cutter with magnet. Put the plotter in cleaning room. 
Suggest you connect the machine’s metals shell with the ground using a
metal wire, to avoid ESD.
(2) First power on, examining plotter: 
Set the power wire to machine power port, connect the power wire to AC220V power. Switching the power on, the green LED on keyboard will
light when power is on. Later, the carriage must move to right side itself, and return a little. This is the initialization of cutting plotter. The message of
speed and pressure will be showed on the LCD monitor. Followed are the
machine  parameters: 
Speed: 600mm/s
Pressure: 150g
(3) Connect to computer: 
You can choose the computer port (com1 or com2). 
Turn off the computer power; turn off the plotter power. 
Connect one side of the RS232 wire to computer RS232 port, other side be
connect to plotter. 
Turn on computer; turn on the plotter, waiting a moment for machine
examining itself. 
Run the any Sign software (Such as Easycut; Flexisign; etc), choose
“HPGL language cutting plotter”, and setup the software parameter as the
following:
Port: com1 or com2
Baud rate: 9600
Parity: None
Data bit: 8
Stop bit: 1
Data flow control: RTS/CTS; XON/XOFF 
Above is done, every thing will be ok. If the red LED on keyboard is light,
please press the “ONLINE” key one time. When the green LED on keyboard is
light, you can output the data from computer to your cutting plotter.

installation process for Redsail vinyl cutter

(1) Place the machine: 
Put the machine on a horizontal table, change plotter four foots, to keep plotter very horizontally. Make enough space not only to the front of plotters but also to the back of plotter.
No shake when plotter is running. Don’t touch the  vinyl cutter with magnet. Put the plotter in cleaning room. 
Suggest you connect the machine’s metals shell with the ground using a
metal wire, to avoid ESD.
(2) First power on, examining plotter: 
Set the power wire to machine power port, connect the power wire to AC220V power. Switching the power on, the green LED on keyboard will
light when power is on. Later, the carriage must move to right side itself, and return a little. This is the initialization of cutting plotter. The message of
speed and pressure will be showed on the LCD monitor. Followed are the
machine  parameters: 
Speed: 600mm/s
Pressure: 150g
(3) Connect to computer: 
You can choose the computer port (com1 or com2). 
Turn off the computer power; turn off the plotter power. 
Connect one side of the RS232 wire to computer RS232 port, other side be
connect to plotter. 
Turn on computer; turn on the plotter, waiting a moment for machine
examining itself. 
Run the any Sign software (Such as Easycut; Flexisign; etc), choose
“HPGL language cutting plotter”, and setup the software parameter as the
following:
Port: com1 or com2
Baud rate: 9600
Parity: None
Data bit: 8
Stop bit: 1
Data flow control: RTS/CTS; XON/XOFF 
Above is done, every thing will be ok. If the red LED on keyboard is light,
please press the “ONLINE” key one time. When the green LED on keyboard is
light, you can output the data from computer to your cutting plotter.

coreldraw plug-in for redsail vinyl cutters

RRedsail Technology Co., Ltd
Installation of CorelDraw Drivers
1. Install the redsail cutting plotter driver
A. Run the RedSailDrv from CD
B. Select the REDSAIL CUTTER PLOTTER(HPGL) driver
You must select the REDSAIL CUTTER PLOTTER(HPGL) driver,then click OK to continue.
Installation is finished,a REDSAIL printer is in your printers folder: 1
Redsail Technology Co., Ltd
2. Printer Settings
After you set REDSAIL CUTTER PLOTTER as default printer, then make the settings as follows:
A. Ports Settings
For COM1 or COM2, just change ‘’the Flow control’’ to XON/XOFF. 2
Redsail Technology Co., Ltd
B. PAPER Settings,
(1) Click the “Printing Preferences”
(2) Set the Paper Size
(3) Set the Print Quality(Low) 3
Redsail Technology Co., Ltd
3. CorelDraw OutPut
A. Edit Work
(1) For letter or character, first SKETCH them (as Figure 1), then FILL them with NOFILL
(as Figure 2), and PRINT.
Figure 1. CorelDraw Design - 1
4
Redsail Technology Co., Ltd
Figure 2. CorelDraw Design - 2
B. Online with the Redsail Cutting Plotter:
Before you send out the data to the cutting plotter, please plug the dongle to the usb port of your PC. ONLINE with the Cutting plotter, then you can press “PRINT” to send the data and communicate with the cutting plotter.
C. Print Settings
Select File \ Print, it will display like Figure.3, and do make the right Print settings as Figure 3.
Figure 3. Proper Settiing 5

Foison vinyl cutter c24

I have faced one problem in c24 cutter, the cutter is not moving smoothly but paper movement is smooth .
I have problem related to y-motor movements, as the moter is not changing the direction smoothly.
I have checked the motor ic's.
I have checked the power supply,
I have also changed the board also.
          But the problem remains there .
  I have changed the carriage P.C.B. sensor (sensor for home/end sensor )
and the problem solved.

Tuesday, March 23, 2010

We are in the sign industry from last 10 years; we are dealing in all branded (ROLAND,GRAPHETEC,MIMAKI) and good quality china vinyl cutting plotters.

We also provide service to

· All types of repairing of plotters

· SignWizard related problems

· FlexiSign7.5 related problems

· All types of software problems

· All types of ready to cut industrial logos

· All types of ready to cut cliparts

· All types of ready to cut symbols

· All types of ready to print cliparts

· All types of ready to print backgrounds

ALL ABOVE SERVICES IN VERY COMPITATIVE RATES.

Note : comcaresystem@rediffmail.com is our authorized mailing ads. Do contact on this mail.

Free technical support and advise to all vinyl cutter users and buyers

We are in the sign industry from last 10 years; we are providing service tol branded vinyl cutting plotters (ROLAND,GRAPHETEC,MIMAKI,) and good quality china vinyl cutting plotters(REDSAIL,FOISON,PCUT).

Now we started a blog service for vinyl cutters; on this blog we will provide free technical support and advise to all vinyl cutter users and buyers.you can ask any question on vinyl cutter here.

We provide service to

· All types of repairing of

ROLAND,GRAPHETEC,MIMAKI,REDSAIL,FOISON,PCUT vinyl cutters/plotters

  • All types of software related problems of vinyl cutters/plotters
  • · SignWizard related problems
  • · FlexiSign related problems
  • · All types of software problems
  • · All types of ready to cut industrial logos
  • · All types of ready to cut cliparts
  • · All types of ready to cut cliparts,logos,designs and symbols
  • · All types of ready to print cliparts
  • · All types of ready to print backgrounds

we are dealing in all branded vinyl cutting plotters (ROLAND,GRAPHETEC,MIMAKI,) and good quality china vinyl cutting plotters(REDSAIL,FOISON,PCUT).we are dealing in all branded vinyl cutting plotters (ROLAND,GRAPHETEC,MIMAKI,) and good quality china vinyl cutting plotters(REDSAIL,FOISON,PCUT).

Note : comcaresystem@rediffmail.com is our authorized mailing ads. Do contact on this mail.

Free technical support and advise to all vinyl cutter users and buyers

We are in the sign industry from last 10 years; we are providing service tol branded vinyl cutting plotters (ROLAND,GRAPHETEC,MIMAKI,) and good quality china vinyl cutting plotters(REDSAIL,FOISON,PCUT).

Now we started a blog service for vinyl cutters; on this blog we will provide free technical support and advise to all vinyl cutter users and buyers.you can ask any question on vinyl cutter here.

We provide service to

· All types of repairing of

ROLAND,GRAPHETEC,MIMAKI,REDSAIL,FOISON,PCUT vinyl cutters/plotters

  • All types of software related problems of vinyl cutters/plotters
  • · SignWizard related problems
  • · FlexiSign related problems
  • · All types of software problems
  • · All types of ready to cut industrial logos
  • · All types of ready to cut cliparts
  • · All types of ready to cut cliparts,logos,designs and symbols
  • · All types of ready to print cliparts
  • · All types of ready to print backgrounds

we are dealing in all branded vinyl cutting plotters (ROLAND,GRAPHETEC,MIMAKI,) and good quality china vinyl cutting plotters(REDSAIL,FOISON,PCUT).we are dealing in all branded vinyl cutting plotters (ROLAND,GRAPHETEC,MIMAKI,) and good quality china vinyl cutting plotters(REDSAIL,FOISON,PCUT).

Note : comcaresystem@rediffmail.com is our authorized mailing ads. Do contact on this mail.

We are in the sign industry from last 10 years; we are dealing in all branded (ROLAND,GRAPHETEC,MIMAKI) and good quality china vinyl cutting plotters.

We also provide service to

· All types of repairing of plotters

· SignWizard related problems

· FlexiSign7.5 related problems

· All types of software problems

· All types of ready to cut industrial logos

· All types of ready to cut cliparts

· All types of ready to cut symbols

· All types of ready to print cliparts

· All types of ready to print backgrounds

ALL ABOVE SERVICES IN VERY COMPITATIVE RATES.

Note : comcaresystem@rediffmail.com is our authorized mailing ads. Do contact on this mail.

Free technical support and advise to all vinyl cutter users and buyers

We are in the sign industry from last 10 years; we are providing service tol branded vinyl cutting plotters (ROLAND,GRAPHETEC,MIMAKI,) and good quality china vinyl cutting plotters(REDSAIL,FOISON,PCUT).

Now we started a blog service for vinyl cutters; on this blog we will provide free technical support and advise to all vinyl cutter users and buyers.you can ask any question on vinyl cutter here.

We provide service to

· All types of repairing of

ROLAND,GRAPHETEC,MIMAKI,REDSAIL,FOISON,PCUT vinyl cutters/plotters

  • All types of software related problems of vinyl cutters/plotters
  • · SignWizard related problems
  • · FlexiSign related problems
  • · All types of software problems
  • · All types of ready to cut industrial logos
  • · All types of ready to cut cliparts
  • · All types of ready to cut cliparts,logos,designs and symbols
  • · All types of ready to print cliparts
  • · All types of ready to print backgrounds

we are dealing in all branded vinyl cutting plotters (ROLAND,GRAPHETEC,MIMAKI,) and good quality china vinyl cutting plotters(REDSAIL,FOISON,PCUT).we are dealing in all branded vinyl cutting plotters (ROLAND,GRAPHETEC,MIMAKI,) and good quality china vinyl cutting plotters(REDSAIL,FOISON,PCUT).

Note : comcaresystem@rediffmail.com is our authorized mailing ads. Do contact on this mail.

We are in the sign industry from last 10 years; we are dealing in all branded (ROLAND,GRAPHETEC,MIMAKI) and good quality china vinyl cutting plotters.

We also provide service to

· All types of repairing of plotters

· SignWizard related problems

· FlexiSign7.5 related problems

· All types of software problems

· All types of ready to cut industrial logos

· All types of ready to cut cliparts

· All types of ready to cut symbols

· All types of ready to print cliparts

· All types of ready to print backgrounds

ALL ABOVE SERVICES IN VERY COMPITATIVE RATES.

Note : comcaresystem@rediffmail.com is our authorized mailing ads. Do contact on this mail.